ACDP 6000 PITOT STATIC TESTER

For laboratory and worshop

The CDP 6000 is a complete high performance multi pressure Ps, Pt and stand-alone static indicator specially designed to be used in the workshop or in the laboratory to test and calibrate all air data equipment (altimeters, vertical speed indicators, anemometer,MACH-meter and air data computers …) and sensors.
The high precision embedded sensors enable the CDP 6000 to be used as a pressure standard.
The CDP 6000 works with a USB cable for PC connection.

ALTIMETER TESTING

AIRSPEED INDICATORS TESTING

VERTICAL SPEED INDICATORS TESTING

AIR DATA COMPUTERS TESTING

PRESSURE SENSORS TESTING

rvsm-compliant

 

  • High accuracy, high resolution
  • RVSM compliant
  • Programmable leak test
  • All four primary flight parameters displayed simultaneously
  • Selectable pressure units: hPa; mb; in Hg; mmHg; ft; m; kts; km/h, ft/min; hm/min, Mach number

Temperature range Operating 10° to 40°C (50° to 104°F)
Storage -20° to +60°C (–4° to 140°F)
Power supply Lithium polymer Battery
Case
Robust aluminium
EMC requirements – MIL STD 462D
Physical
240x120x210 mm (9.4×4.7×8.2) inch – 2.8kg (6.17 lbs)
Calibration
Recommended period 12 months

Pressure Range Accuracy
No linearity + Hysteresis + Repeatability
(extanded uncertainty)
Maximum pressure Long time drift (1 year ) T° drift (ref 25°C)
Low pressure sensor ± 1000 Pa 0,05% FS (Typ)
0,25% FS (Max)
2500 Pa 0,5% FS 25 to 85°C
1% FS
Standard pressure sensor
2 bar absolute
5 bar absolute
20 bar absolute
0,04% FS 2 x FS
4 x FS
4 x FS
0,05% FS(Typical)
0,1% FS(Max)
-10 to 50°C
0,5% FS
High pressure sensor
1,5 bar absolute
3,5 bar absolute
0,01% FS
Drift time included
2 x FS
2 x FS
0,01% FS -10 to 50°C
0% (integrated)

Measurement specifications in standard conditions
FS = Full scale
* Specifications in option (adjusted in our metrology laboratory with agreement)