air-data-set-tester-labatory-ateq

ADSE 741

Pitot-Static tester for laboratories and workshops
The ADSE 741 is a complete high performance three channel Ps, Pt and AoA stand-alone test bench specially designed to be used in a workshop or laboratory to test and calibrate all air data equipment such as altimeters, vertical speed indicators, air speed indicators, pneumatic AoA (Angle of Attack) indicators, MACH-meter, air data computers, specific probes and sensors.

The high precision embedded sensors enable the ADSE 741 to be used as a pressure standard.
The user interface is programmed using Windows® and Labview®, with a data base managed in a spreadsheet for easy evaluation, management, statistics and presentation.

ADSE 741 FEATURES

•  Complete self check of set before use
•  High accuracy, high resolution
•  RVSM compliant
•  Programmable leak test
•  Programmable flight envelope to protect
  equipment under test

•  All four primary flight parameters displayed
  simultaneously
•  Programmable (password write protected)
  test schedules – 24 programs available
•  Select pressure units: hPa; mb; in Hg; mmHg;
  ft; m; kts; km/h, ft/min; hm/min, Mach number

Tablets
Our pitot-static testers are mainly used with a wired color touchpad, except the ADSE 741 which works in WIFI, thus giving greater freedom to the operator. The HMI has been designed to be as simple and efficient as possible, which is confirmed by users.

Functions
Different functions such as flight areas, slope monitoring, balancing, etc. enable flight instrument tests to be carried out safely without accidentally damaging them. It is possible to work in manual or automatic mode by programming test sequences (ideal for testing altimeters in the workshop).

Leak Test
The leak test is a function that measures the leakage rate of the circuits Ps, Pt for and is intended to calculate the leak rate per minute. The test time is set to 1 minute by default, but can be adjusted.

Tester Packaging
Our pitot-static testers are available for the laboratory in 19 “rack version (with or without integrated pumps) or in a rolling suitcase for the hangar and tarmac. We also strive to reduce the size and weight of our testers so that they are easier to transport and use (ex ADSE 741).

Multiway
For large airplanes with several airspeed circuits, our ADSEs can be equipped with up to 4 Ps, Pt and AoA channels. The operator can then select and isolate the various circuits without leaving the cockpit.

Battery
Some devices have a default battery (ADSE 741), and can be added as an option to others.

Options
It is possible to add other options on our Pitot-static testers, such as the AoA (angle of attack), as well as low-speed sensors for helicopters, gliders and drones, high-speed sensors for fighter planes, control alti-coders, etc …

ADSE 741 SPECIFICATIONS

MEASUREMENT SPECIFICATIONS

Function Range Accuracy
Altitude -2,300 to 60,000 ft
(up to -4,000 ft to 100,000 ft optional)
±1.5 ft at 0 ft
± 4 ft at 30,000 ft
± 16 ft at 60,000 ft
Altitude rate Up to ± 6,000 ft/min
(up to ± 60,000 ft/min optional)
± 1%
± 1%
Indicated airspeed 10 to 800 kts
(up to 1000 kts optional)
± 1 kt at 50 kts (± 0.5 kts at 50 kts optional)
± 0.2 kt at 350 kts (± 0.1 kts at 350 kts opt.)
± 0.04 kt at 650 kts
Mach N° 0.1 to 4.0 Mach
(0.1 to 10 Mach optional)
± 0.001 M at 0.8 M/25,000 ft
± 0.002 M at 1.7 M/30,000 ft
Static sensor 30 to 1200 mbar 0.01% FS
Pitot sensor 30 to 3000 mbar 0.01% FS
AoA sensor 30 to 3000 mbar 0.01% FS


Measurement specifications in standard conditions

  On-going developments may cause a change in specifications without notice.
  Special developments may be considered on a case by case basis.

GENERAL SPECIFICATIONS

Temperature Operating -5°C to 50°C (23°F to 122°F)
Storage -20°C to +60°C (–4°F to 140°F)
(Extanded Range on-demand)
Power supply 90/240V AC from 50 to 400Hz
Housing Completely weatherproof, meets EMC requirements MIL STD 462D
Dimensions 339 x 295 x 152mm (13.3 x 11,6 x 5.9 inch)
6kg (13.2 lbs)
Calibration Recommended period 12 months
Ease of use Wi-Fi remote touch screen LCD colour
Integrated bag for cables and hoses
Ease of maintenance Maintenance limited to calibration, regular external cleaning

OPTIONS

  IEEE488 digital interface
  Ps & Pt outlet at the back of the bench
  Vertical housing
  Low range Pt sensor: 350 kts max for better accuracy
  Pneumatic connectors JIC 37 (AN4) or Staubli