ADSE 746
PITOT-STATIC TESTER
Our top range pitot-static tester
The ADSE 746 caters fully to all aircraft types and the different electrical power supplies. It can be used for testing high performance civil and military aircraft, fixed and rotary wing. The multi-pressure outlets option can suit the more complex pilot-static systems.
This pitot static tester is designed primarily for flight line use to cover the testing of all barometric and manometric pressure instrument systems. The large touch screen display, with on-screen help, enables all checks to be carried out easily on the flight deck or in the cockpit, by a single operator. The test set is robust and housed in a mobile weatherproof case fitted with tire wheels. An attached bag contains the pressure hoses and electrical cables.
Accessories for specific applications are available upon request.
ADSE 746 FEATURES
• Built-in pressure and vacuum pumps
• Remote control unit based on Windows
• Complete self check enable
• High accuracy, high resolution
• RVSM compliant
• Programmable leak test
• Programmable flight envelope to protect
• equipment under test
• All four primary flight parameters displayed
• simultaneously
• Programmable (password write protected)
• test schedules
• Select pressure units: hPa; psi; inHg; mmHg;
• ft; m; kts; km/h; Mach number
Designed for multiple Channel tests
The ADSE 746 has been specially designed to conduct tests on aircraft requiring more than one Ps, Pt or/and AoA channel to be tested simultaneously. Thanks to four independent channel controls, the ADSE 746 allows the operator to test equipment fitted on the aircraft, such as altimeter, airspeed indicator, rate of climb indicator, air data computers… Whether in the workshop, in the hangar or directly on the tarmac, the operator can select and isolate the various circuits without leaving the cockpit.
The ADSE 746 is an RVSM compliant test set.
A user-friendly tablet
The ADSE 746 allows you to connect a wired or WiFi colour touchpad to the test set giving greater freedom to the operator. The user will manage your tests by program sequences or use pre-defined test sequences in the ADSE 746. As confirmed by many existing users, the HMI has been designed to be user-friendly, efficient and as straightforward to use as possible.
Designed to evolve into a diverse environment
The ADSE 746 Test Set is housed in very rugged housing. The ADSE 746 has wheels to enable this air data test to be easily moved directly to the aircraft on the tarmac or in the hangar to proceed “in situ” to test the equipment fitted to the aircraft. The ADSE 746 allows the operator to adapt his work, even in a different working environment, thanks to the Remote-Control Unit (RCU).
The Remote-Control Unit (RCU) can be connected via WiFi or cable to suit the working environment and the operator’s needs. The RCU is a Tablet PC fitted with a watertight touch-sensitive screen displaying the static (Ps) and total (Pt) and AoA (Angle of Attack) pressure parameters and gives the operator greater flexibility to move around the aircraft during the test. Power to the ADSE 746 can be 90/264 VAC, 50 to 400Hz.
ADSE 746 SPECIFICATIONS
MEASUREMENT SPECIFICATIONS
| Function | Range | Accuracy |
|---|---|---|
| Altitude | -2,300 to 60,000 ft |
± 3 ft at 0 ft |
| Altitude rate | 100 to 6,000 ft/min | ± 10 ft or ± 1 % |
| Airspeed (1) | 0 to 800 kts | ± 0.5 kt at 50 kts |
| Airspeed Mach | 0 to 4.0 Mach | ± 0.0006 M at 0.8 M at 25,000 ft |
| Angle of Attack (2) | ± 1000 DhPa | ± 0.35 DhPa |
| Static sensor (3) | 72 to 1,100 hPa | ± 0.13 hPa |
| Pitot sensor (3) | 0 to 1,455 DhPa | ± 0.30 DhPa |
| AoA sensor (3) | 72 to 2,000 hPa | ± 0.30 hPa |
(1) Accuracy after Autozero function
(2) AoA options: ± 2,000 DhPa (± 0.40 DhPa)
(3) Different range & rate of sensors available on request or options
Measurement specifications in standard conditions
• On-going developments may cause a change in specifications without notice.
• Special developments may be considered on a case by case basis.
DELIVERY INCLUDED ACCESSORIES
• Wifi Remote control in standard
• Two nipples RB03-M / AN-4 M
• 10 m Ps and Pt flexible hoses with connector AN-4-F /RB03-M
• 10 m AC cable
• Vertical plastic box with rolling tire system
• Suitcase for tubes and cables
GENERAL SPECIFICATIONS
| Temperature | Operating -10°C to 50°C (14°F to 122°F) Storage -20°C to +60°C (–4°F to 140°F) (Extanded Range on-demand) |
| Power supply | 90/264 VAC from 50 to 400Hz |
| Case | Completely weatherproof, meets EMC requirements MIL STD 462D |
| Physical | 625 x 500 x 297 mm (25.6 x 19.7 x 11.7 inch) 20kg (44 lbs) |
| Calibration | Recommended period 12 months |
| Ease of use | Wi-Fi remote touch screen LCD colour Integrated bag for cables and hoses |
| Ease of maintenance | Maintenance limited to calibration, regular external cleaning |
OPTIONS
• Range on Ps: 80,000 ft or 100,000 ft
• Range on Pt: 350 or 1,000 kts
• Altitude coder
• Suction Pump
• Internal Battery Pack
• Four selectable Outputs
• DC Power Option (19 to 32 V DC)
• EPR / Cabin Pressure / Outflow Valve
• Bigger Pumps (Volume dependant): 80,000 ft – 10,000 ft/min or 100,000 ft
