ADSE 740

PITOT-STATIC TESTER FOR LABORATORIES AND WORKSHOPS

The ADSE 740 is a complete high performance dual pressure Ps and Pt standalone test bench specially designed to be used in the workshop or in the laboratory to test and calibrate all air data equipment such as altimeters, vertical speed indicators, air speed indicators, MACH-meter, air data computers …) and sensors.
The high precision embedded sensors enable the ADSE 740 to be used as a pressure standard.
The user interface is programmed using Windows® and Labview®, with the data base managed using a spreadsheet for easy evaluation, management, statistics and presentation.

ADSE740 FEATURES

  • Complete self check of set before use
  • High accuracy, high resolution
  • RVSM compliant
  • Programmable leak test
  • Programmable flight envelope to protect equipment under test
  • All four primary flight parameters displayed simultaneously
  • Programmable (password write protected) test schedules – 24 programs available
  • Select pressure units: hPa; mb; in Hg; mmHg; ft; m; kts; km/h, ft/min; hm/min, Mach number

 

Tablets
Our pitot-static testers are mainly used with a wired color touchpad, except the ADSE 650 which works in WIFI, thus giving greater freedom to the operator. The HMI has been designed to be as simple and efficient as possible, which is confirmed by users.

Functions
Different functions such as flight areas, slope monitoring, balancing, etc. enable flight instrument tests to be carried out safely without accidentally damaging them. It is possible to work in manual or automatic mode by programming test sequences (ideal for testing altimeters in the workshop).

Leak Test
The leak test is a function that measures the leakage rate of the circuits Ps, Pt for and is intended to calculate the leak rate per minute. The test time is set to 1 minute by default, but can be adjusted.

Tester Packaging
Our pitot-static testers are available for the laboratory in 19 “rack version (with or without integrated pumps) or in a rolling suitcase for the hangar and tarmac. We also strive to reduce the size and weight of our testers so that they are easier to transport and use (ex ADSE 650).

Multiway
For large airplanes with several airspeed circuits, our ADSEs can be equipped with up to 4 Ps, Pt and AoA channels. The operator can then select and isolate the various circuits without leaving the cockpit.

Battery
Some devices have a default battery (ADSE 650), and can be added as an option to others.

Options
It is possible to add other options on our Pitot-static testers, such as the AoA (angle of attack), as well as low-speed sensors for helicopters, gliders and drones, high-speed sensors for fighter planes, control alti-coders, etc …

ADSE740 SPECIFICATIONS

MEASUREMENT SPECIFICATIONS

Function Range Accuracy
Altitude -2,300 to 60,000 ft
(up to -4,000 ft to 100,000 ft optional)
±1.5 ft at 0 ft
± 4 ft at 30,000 ft
± 16 ft at 60,000 ft
Altitude rate Up to ± 6,000 ft/min
(up to ± 60,000 ft/min optional)
± 1%
± 1%
Indicated airspeed 10 to 800 kts
(up to 1000 kts optional)
± 1 kt at 50 kts (± 0.5 kts at 50 kts optional)
± 0.2 kt at 350 kts (± 0.1 kts at 350 kts opt.)
± 0.04 kt at 650 kts
Mach N° 0.1 to 4.0 Mach
(0.1 to 10 Mach optional)
± 0.001M at 0,8M/25,000 ft
± 0.002M at 1,7M/30,000 ft
Static sensor 30 to 1200 mbar 0.01% FS
Pitot sensor 30 to 3000 mbar 0.01% FS

Options :
Internal pump: 60.000 ft – 6.000 ft/min (Volume dependant)
IEEE488 digital interface
Ps & Pt outlet at the back of the bench
Vertical housing
Specific Pt sensor for improved accuracy at low speed
Pneumatic connectors JIC 37 (AN4) or Staubli

Measurement specifications in standard conditions
– On-going developments may cause a change in specifications without notice.
– Special developments may be considered on a case by case basis.

ADDITIONAL FEATURES

Temperature range Operating 15° to 40°C (60° to 104°F)
Storage -20° to +60°C (–4° to 140°F)
Power supply 90/240V, 50 to 400Hz AC, 150VA
Case 19” x 4 U x 524 mm (20.6 inch), 14kg (31 lbs)
Screen 17” LCD color 2.5 kg (5.5 lbs)
Calibration Recommended period 12 months
Ease of use Windows human/machine interface
Program script
Easy programming of test reports
Ease of maintenance Modular design permitting ease of accessibility to
mechanical assemblies and electronic components

ADSE740 FACTSHEETS

Detailed information about the ADSE740 including features, specifications, etc.

PRODUCT SUPPORT

Factsheets, Calibration, Training,
Spare Parts and Software upgrades.
GO

CONTACT SUPPORT

Contact tech support about your
ATEQ product or send it for repair.
GO